John Deere L300 Large Square Balers

by Bill Kletecka, Cuba CIty, WI

John Deere has once again joined the large square baler market, with two models available for shipment this year.  These new balers are numbered L330 which makes a 3’x3’ sized bale, and L340 which makes a 3’x4’ bale.  The L300 series balers are double tie balers, holding the bale together with a set of knots at each end of the bale. The L330 has four knotters, while the larger L340 has six to accommodate the wider bale.  Both models can be ordered with pre-cutters, but must be done out of the factory.  Pre-cutters are a set of knives that can be raised and lowered inside the baler’s throat to cut and size the crop for easier bale break up.

Some of you may remember the John Deere 100 balers, and these are more than likely not pleasant memories.  Well, we can finally put those nightmares to rest, because these balers are completely redesigned. You may have heard that these are just a Kuhn baler painted green. Well, that is only about 15% true.  Deere did indeed purchase the patents from Kuhn on their baler, but 85% of the parts have been reengineered for added strength, increased reliability, and better longevity to meet the extreme baling demands in the United States. It is my understanding that the only parts of the baler that haven’t been changed are those dealing with the under carriage and axles of the baler.

Sloan Implement was fortunate enough to take delivery of a demonstration machine for our Wisconsin stores at the end of July.  After a short pre-delivery inspection of the baler, we hit the small grain fields in our area to start baling straw.  From the first demonstration through all subsequent demos, customers commented as to how easy it was to see the entire pick up from the tractor seat, how simple the monitor was to run, how “cool” the electronic flags on the display inside the cab were versus the mechanical knotter flags on the back of the baler (they show if there was a missed knot, which we have yet encounter with this baler), and also how dense and square-edged the bales were made.

We have baled alongside of several Hesston, Massey Ferguson, Case IH, and even a Krone baler with very favorable results for the new John Deere.  Customers have experimented with everything from an hour long race to see the baler’s capacity and a slow speed test to check for the most uniform bale flake, to weighing our bales against theirs.  One could not ask for more appropriate validation as proof that this baler will be a baler that lasts in the marketplace. All in all, we have gone head-to-head with the competition, and customers have had a very positive response to the baler.  If you are in or around Sloans northern stores and would like to see it in action, please contact one of your local AMS personnel or salesman to set up a demo.  Here are some pictures from a few of our demos.









Sloan Support is written by the product support team at Sloan Implement, a 20 location John Deere dealer in Illinois and Wisconsin.  Learn more at




Sloan Adds 20th Deere Dealership in Fulton, IL

Sloan Implement Co is proud to announce the addition of our 20th location in Fulton, IL.  Previously known as Maloney Equipment Inc., the Fulton location is situated along the Mississippi River on highway 84.   Fulton is now part of Sloan’s 7 store northern group and will have a Sloan parts transfer truck visiting the store on a daily basis.  We are excited to have such an experienced group of employees join the Sloan Implement team and we envision great things to come from the Fulton location.  You can view contact information for the new Fulton location by clicking here.

Sloan Support is written by the product support team at Sloan Implement, a 20 location John Deere dealer in Illinois and Wisconsin.  Learn more at




New B Wrap for John Deere Hay Balers

by Cody Hatcher, Assumption, IL 

John Deere and Ambraco are excited to announce this new product, exclusive to John Deere balers. B-wrap is an alternative to net wrap and provides “barn quality hay without the barn.” The secret is the TamaSCM technology that keeps moisture out, while the micropores allow moisture inside the bale to escape. B-wrap is compatible with 7, 8, and 9 series balers, and the kit can be installed in less than an hour. Once the kit is installed, the baler can be switched from net wrap to b-wrap in less than 5 minutes, and vice versa. B-wrap is sold in rolls just like regular net wrap; however, there are a set amount of bales you can wrap depending the width of your baler. A roll of b-wrap will cover (45) 4’ bales and (35) 5’ bales, while still allowing you to make bales between 60”-68” in diameter. It begins by wrapping the bale once with regular net wrap and then following with a layer of the TamaSCM material. Following the TamaSCM are two more wraps of regular net wrap. With four layers of coverage, b-wrap has been tested to show just a 2% loss of dry matter while stored outside in a well-drained area for 6 months. This is compared to a 2.1% loss of dry matter for regular net wrap bales stored inside for the same period. Although the cost of b-wrap is $4 or $5 more per bale, you are sure to see the advantage after you open your bale up after 6 months of outdoor storage and see that it looks the same as the day you baled it. We have demoed b-wrap to a few customers and have had very positive feedback on the ease of use and appearance of the bales. If you store the majority of your bales outside, b-wrap is the only option for “barn quality hay without the barn.” Let us know if you would like a demonstration and we will be happy to come to your farm and show you the John Deere 569 baler equipped with B Wrap.


You can read more about B wrap by visiting John Deere’s B Wrap Information Page



Sloan Support is written by the product support team at Sloan Implement, a 19 location John Deere dealer in Illinois and Wisconsin.   Learn more at